 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TA75W393FU TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA75W393FU Dual Voltage Comparator This device consist of two independent voltage comparators that designed to operate from a single power supply over a wide range of voltage. Normal operation from dual supplies is also to be guaranteed on voltage range from 1V to 18V. VCC is necessary at least more 1.5V volts than the input common mode voltage. The output can be connected to other open collector outputs to achieve Wired-OR relation ship. Features Compatible to TA75393F. Single supply voltage range or dual supplies Low supply current Low input offset voltage Wide input common mode voltage range : 0.8mA (typ.) : 2mV (typ.) : 0VDC to VCC - 1.5VDC Weight: 0.021g (typ.) : 2VDC to 36VDC or 1VDC to 18VDC Output compatible with TTL, DTL, MOS and CMOS logic system. The output can be connected to achieve Wired-OR relation.. Marking (Top View) Pin Connection (Top View) 1 2007-11-01 TA75W393FU Equivalent Circuit Absolute Maximum Ratings (Ta = 25C) Characteristic Supply voltage Differential input voltage Input voltage Power dissipation Operating temperature Storage temperature Symbol VCC, VEE DVIN VIN PD Topr Tstg Rating 18 or 36 36 +0.3~VCC 250 -40~85 -55~125 Unit V V V mW C C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Electrical Characteristics (VCC = 5V, VEE = GND, Ta = 25C) Characteristic Input offset voltage Input bias current Input offset current Common mode input voltage Supply current Voltage gain Sink current Output Voltage ("L" Level) Output Leak Current Response Time Symbol VIO II IIO CMVIN ICC GV Isink VOL ILEAK trsp Test Circuit 1 2 2 3 4 5 6 No load RL = 15k IN (+) = 0VDC, IN (-) = 1VDC VOL = 1.5V IN (+) = 0VDC, IN (-) = 1VDC Isink = 3mA IN (+) = 1VDC, IN (-) = 0VDC VO = 5VDC RL = 5.1k, CL = 15pF Test Condition Min 0 6 Typ. 2 25 5 0.8 200 16 0.2 0.1 1.3 Max 5 250 50 VCC-1.5 2 0.4 Unit mV nA nA V mA V/mA nA V nA s 2 2007-11-01 TA75W393FU Test Circuit (1) VIO (2) II, IIO (3) ICC (4) Isink (5) VOL (6) trsp 3 2007-11-01 TA75W393FU 4 2007-11-01 TA75W393FU Package Dimensions SSOP8-P-0.65 Unit: mm Weight: 0.021g (typ.) 5 2007-11-01 TA75W393FU RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN GENERAL * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 6 2007-11-01 |
Price & Availability of TA75W393FU07
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |